Locally owned in Greater MilwaukeeLocally owned in the Valley · Licensed and insured Mon to Sat 7am to 7pm · 24/7 emergency tarping
Home / Materials
Milwaukee & SE WisconsinPhoenix & the ValleyMATERIALS

Materials

Every profile we install, drawn in section, with the weight, the wind rating and the honest service life. Not a brochure.

Licensedand insured
Freeinspection and scope
15 yrWorkmanship warranty
24/7Emergency tarping
Writtenscope before work
How to read this page

The profile decides the look. The spec decides whether your house can take it.

Most material pages show you a photograph and a color swatch. That tells you what a roof looks like from the street and nothing about whether it suits your building. Below is every profile we install, drawn in cross-section, with the numbers that actually govern the decision: what it weighs, what wind it is rated for, and how long the material really lasts.

Weight is the number that eliminates options

Asphalt runs 200 to 480 lb per square. Clay and concrete tile run 600 to 1,000. A house framed for shingles cannot simply take tile, and finding that out after signing is an expensive way to learn it. We check your framing during the inspection.

Tile profiles
Shingle profiles

Three tile profiles, in section

Three shingle profiles, in section

Clay and concrete tile in the profiles the valley actually uses. The drawings are cross-sections, so you can see how each one sheds water and how deep the shadow line sits.

The asphalt profiles we install, drawn in section so you can see how the layers stack and where the shadow line comes from.

Two piece

True Barrel

The oldest roof profile in use, and still the most recognizable. A pan tile laid concave up with a cover tile laid over the joint, so the roof reads as deep parallel ridges. It is the profile people picture when they picture a Spanish roof.

Weight900 to 1,000 lb per square
PiecesTwo per course, pan and cover
Best onMediterranean, Spanish Colonial, Santa Barbara
Service life50 years or more for the tile itself
One piece

Spanish S

Pan and cover formed as a single tile, which gives most of the barrel look at meaningfully less weight and less labor. This is the valley default, and for most Phoenix homes it is the right answer.

Weight750 to 900 lb per square
PiecesOne per course
Best onMost valley homes, ranch through revival
Service life50 years or more for the tile itself
One piece

Flat interlocking

A flat profile with an interlocking side channel. Reads as slate or shake rather than as Spanish tile, and it is the lightest clay option, which matters on a structure that was not framed for tile.

Weight600 to 750 lb per square
PiecesOne per course, side interlocking
Best onContemporary, Territorial, modern desert
Service life50 years or more for the tile itself
Single layer

Three tab

The old flat shingle, one layer with cut tabs. Cheapest and lightest, shortest life, and increasingly rare on new work. Worth considering only on a property you are about to sell, and even then the saving is small.

Weight200 to 240 lb per square
Wind ratingTypically 60 mph
Best onRentals and short hold properties
Service life15 to 18 years
Laminated

Architectural

Two layers laminated together, which gives depth, a better wind rating and roughly half again the life of a three tab. This is the standard for good reason and what most homes should have.

Weight250 to 300 lb per square
Wind ratingTypically 110 to 130 mph
Best onAlmost every home in our service areas
Service life20 to 25 years
Heavy laminated

Designer profile

Heavier shingles cut to imitate slate or shake. Chosen for how the roof looks rather than for performance, though the extra weight does buy some wind resistance. Worth it on the right house.

Weight350 to 480 lb per square
Wind ratingTypically 130 mph
Best onSteep visible roofs, period homes
Service life25 to 30 years
Asphalt is still an option here

Plenty of valley homes are framed for shingles and should stay that way. If tile is not right for your structure or your budget, architectural asphalt is a perfectly good roof in Phoenix. It ages faster under ultraviolet than it does in a cold climate, so expect fifteen to twenty years rather than twenty five.

Color

Fired color and surface color are not the same thing

On clay tile the color is the fired clay itself, running through the whole body of the tile. It cannot fade off because there is nothing on the surface to lose. That is why a hundred year old clay roof in Spain still reads as terracotta.

Concrete tile is colored with a surface treatment, which is why concrete tends to soften and chalk over decades while clay does not. Asphalt gets its color from the mineral granules bonded to the surface, and when those granules thin out the color goes with them, which is the visible sign that a shingle roof is aging.

Whatever the material, get real samples

A screen cannot show you how a color behaves in direct sun against your particular brick or stucco. We will post you actual pieces, free, and nobody turns up at your door because you asked.

Order free samples

Underneath

The material you choose is not the material that fails

This is the single most useful thing on this page. Whatever goes on top, the layer that actually keeps water out of your house is the underlayment beneath it, and that layer has a much shorter life than tile does.

LayerRealistic service life
Clay tile50 years or more. Often outlives two underlayments.
Concrete tile40 to 50 years, with some color softening.
Underlayment beneath tile15 to 25 years in valley heat. This is what a re-underlayment replaces.
Underlayment beneath tile20 to 30 years in this climate. This is what a re-underlayment replaces.
Architectural asphalt15 to 20 years here, where ultraviolet does the aging.
Architectural asphalt20 to 25 years, correctly ventilated.
Flashing and pipe boots10 to 20 years. Reusing old metal under a new roof is the most common corner cut in the trade.

So when someone quotes you a fifty year tile roof, ask what underlayment is going under it and what its warranty is. That is the number that governs when you next see a roofer.

Common questions

Can my house take a tile roof?

Not always, and it is the first thing to check. Tile weighs three to four times what asphalt does. A house framed for shingles may need structural work before tile goes on, and any roofer who quotes tile without asking about your framing has skipped a step.

Is clay or concrete tile better?

Clay holds its color far better because the color is the fired clay itself rather than a surface coating, and it handles ultraviolet without fading. Concrete costs less up front and is widely used in the valley. Both outlast the underlayment beneath them, which is the part you will actually replace.

If tile lasts fifty years, why would I ever re-roof?

Because the tile is only the rain screen. The waterproofing is the underlayment beneath it, and that has a fifteen to twenty five year life in valley heat. A re-underlayment lifts and stacks your existing tile, replaces what is underneath, and relays the same tile.

What does a square mean?

One hundred square feet of roof surface. Roofing material is sold and priced by the square, and weights are quoted per square, which is why we list them that way here.

Do you install the color I want?

Almost certainly. Availability varies by profile and by region, so tell us the one you have in mind and we will confirm it is stocked for your area before you commit. We will also mail you real samples free.

Not sure which material your house can take?

That is exactly what the free inspection answers. We look at the framing, not just the roof.

Book a free inspection 414.436.5036 602.715.5782
Call now Call now Free inspection